1. If you replace only the post make sure fence is supported before taking the old post.
2. Dig hole approx 2feet deep
3. Place post in hole in correct position. It will be helpful if you draw lines on the ground or something else before taking out the old one, so you position the new one in the same place as the old one.
4. When the new one is in right position on the bottom, use spirit level to make sure that post stand vertically and is in perfect strait position.
5. Fill the hole about 6 inch with water and drop the ready postcrete about 12 inch from the bottom of the post.
6. As you have about 5 minutes till postcreate get solid make sure to check with the spirit level that is in right position. Than fill it with more water and drop the secont bag of postcreate.

Make sure that is not to watery, have ready something like strong bamboo size stick and dip it in.

How To Replace a Fence Post

6. a. Gave bit more than 10 minutes, make sure that post is strong and not moving. Than screw panel to new post.
7. Very important pour some pea gravel around bottom of post to allow drainage.
8. Fitting panel to the new post can be very tight sometimes. Take out the metal bracket from the Aris. Sometimes taking them out can be very difficult if thay are nailed, so you might damage them. Make sure you have replacement. Get out the last feather edge from the Aris and make sure that Aris can feet. If they don’t feet just do little cut to adjust them to a new post.
9. Have somebody to keep the fance so you can put back the metal bracket and screw them in right place on the post. And than put back last featheredge to cover the gap between post. Epsom Fencing